Mass Transfer Limitation in Different Anode Electrode Surface Areas on the Performance of Dual Chamber Microbial Fuel Cell
- 1 Monash University Sunway Campus, Malaysia
- 2 University of Toulouse, France
- 3 University Kebangsaan Malaysia, Malaysia
- 4 Université Lille 1-ENSCL-EC-Lille, France
- 5 Kangwon National University, Korea
Abstract
In this study, the effect of different electrode surface areas on the performance of dual chamber Microbial Fuel Cells (MFC) was investigated. Four different electrodes with 12, 16, 20 and 24 cm2 surface areas were tested in an MFC system. The 20 cm2 electrode generated an output power of 76.5 mW/m2 was found to be the highest among all the electrodes tested. This might be due to better interactions with microorganism and less mass transfer limitation. In addition, this indicates that the chances for attachment of bacteria and generation of electricity in larger electrode surface areas might be limited by mass transport and by higher surface area. The output power generation was then followed by the 16, 12 and 24 cm2 electrodes which generated 69.6, 64.7 and 61.25 mW/m2 electricity, respectively.
DOI: https://doi.org/10.3844/ajbbsp.2012.320.325
Copyright: © 2012 Babak Salamatinia, Ali Ghannadzadeh, Mostafa Ghasemi, Majid Sadeqzadeh, Tahereh Jafary, Wan Ramli Wan Daud and Sedky Hassan Aly Hassan. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 4,532 Views
- 3,931 Downloads
- 19 Citations
Download
Keywords
- Electrode Surface Area
- Microbial Fuel Cells
- Power Generation
- Anode
- Mass Transfer